BaitCaster,
That 5 foot thick layer of sonar return at the top of the 2D sonar display looks to be from surface clutter. Looks like you may have had the 83kHz sonar turned on as well. Try it with only the 200kHz turned on and see if it decreases. You may have to go in and adjust the Surface Clutter menu as well.
The constant vertical line to the left of the centerline on the left Si sonar looks to be from either a physical blockage by something on your boat (motor, livewell intake, ladder,…) or could be from the air bubbles coming off the left side of the hull. Try shutting the motor down and allow the boat to drift and see if it disappears or not. If it does than its air bubbles causing this and if doesn’t than its something to the left of the SI transducer blocking and reflecting some of the left Si sonar. Try trimming the motor up and see if it goes away or not.