Humminbird Side Imaging Forums
Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: stratofisher on July 12, 2011, 02:17:49 AM
-
I am planning on installing my 1197 on the jetboat with dual SI transducers connected with the Y cable to give effective left and right. I plan to run from the Y cable into a TS3 switch so that I can utilize my Alumaducer thru hull for high speed 2d. I figured this way I could use the HB 2-d off the SI transducer at slow speed and switch to the Alumaducer through hull for high speed depth. Was using the Alumaducer with my previous X-15 Lowrance and it worked well. Have heard that it should work with the HB given that I have the proper adapater cable- which I do have now. Any issues with this proposed setup. Have read some previous posts on the hazards of switches. Just want to make sure I have it all connected in a good configuration.
-
I would make sure and change the Transducer Select menu setting before changing from the Si transducers to the AlumaDucer (and change it back after switching back to the Si transducers).
-
Finally got it all installed. Works as advertised. I love this new side scan sonar. A bit of cash wrapped up with the switch and extra transducers, but wow is all I can say. Feels like cheating fishing with this setup. The dual setup works great. Glad that I went that way.