Author Topic: access is denied.[G:\MATRIX\PC_131105c.gpx]  (Read 5688 times)

0 Members and 1 Guest are viewing this topic.

Offline steelebob

  • Full Member
  • ***
  • Joined: May 2011
  • Location: Central NH
  • Posts: 110
  • 1994 TRACKER NITRO 160 and 4 cyl 2017 Yamaha 70 h
  • Unit(s): Helix 2nd gen 10 and 9
  • Accessories: Ulterra
access is denied.[G:\MATRIX\PC_131105c.gpx]
« on: November 05, 2013, 01:28:23 PM »
When I try to open a NEW FILE in humpc, I get that message. So how would I open a new file?
I dream of things that never were, and ask why not?


Offline LittleGazoo

  • Full Member
  • ***
  • Joined: Jan 2011
  • Location: Big Sandy, TX
  • Posts: 221
  • Unit(s): SOLIX 15 G2, SOLIX 12 G2
  • Software: 3.640
  • Accessories: Ethernet
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #1 on: November 05, 2013, 03:53:10 PM »
Is G: the SD-card?  If so, maybe it's write-protected and move the SD-card tab so its not locked(write-protected).

While it's OK to put HBPC's GPX files on an SD-card, I would also have it on my PC hard-disk.
And maybe put the GPX files outside the MATRIX folder.
IMO

The HBPC default location of GPX is My Documents>My_HumminbirdPC>GPX_Files
« Last Edit: November 05, 2013, 03:55:21 PM by LittleGazoo »

Offline steelebob

  • Full Member
  • ***
  • Joined: May 2011
  • Location: Central NH
  • Posts: 110
  • 1994 TRACKER NITRO 160 and 4 cyl 2017 Yamaha 70 h
  • Unit(s): Helix 2nd gen 10 and 9
  • Accessories: Ulterra
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #2 on: November 05, 2013, 04:00:20 PM »
Yea, I'm trying to think ahead just like that "Change Once, Save it 2ce, "
I dream of things that never were, and ask why not?

Offline LittleGazoo

  • Full Member
  • ***
  • Joined: Jan 2011
  • Location: Big Sandy, TX
  • Posts: 221
  • Unit(s): SOLIX 15 G2, SOLIX 12 G2
  • Software: 3.640
  • Accessories: Ethernet
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #3 on: November 05, 2013, 05:05:50 PM »
So . . . Problem solved?

Offline steelebob

  • Full Member
  • ***
  • Joined: May 2011
  • Location: Central NH
  • Posts: 110
  • 1994 TRACKER NITRO 160 and 4 cyl 2017 Yamaha 70 h
  • Unit(s): Helix 2nd gen 10 and 9
  • Accessories: Ulterra
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #4 on: November 05, 2013, 05:21:32 PM »
Not yet but I might have a work around. I don't have "My Documents>My_HumminbirdPC>GPX_Files[/b] ++ I'm tech challenged
« Last Edit: November 05, 2013, 05:25:21 PM by steelebob »
I dream of things that never were, and ask why not?

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #5 on: November 07, 2013, 08:57:32 AM »
That is the default location that the HumminbirdPC program uses so you should have it when the program was installed.
Greg Walters at Humminbird
gwalters@johnsonoutdoors.com

Offline steelebob

  • Full Member
  • ***
  • Joined: May 2011
  • Location: Central NH
  • Posts: 110
  • 1994 TRACKER NITRO 160 and 4 cyl 2017 Yamaha 70 h
  • Unit(s): Helix 2nd gen 10 and 9
  • Accessories: Ulterra
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #6 on: November 07, 2013, 09:17:33 AM »
So how would I get it to open a new file?
I dream of things that never were, and ask why not?

Offline LittleGazoo

  • Full Member
  • ***
  • Joined: Jan 2011
  • Location: Big Sandy, TX
  • Posts: 221
  • Unit(s): SOLIX 15 G2, SOLIX 12 G2
  • Software: 3.640
  • Accessories: Ethernet
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #7 on: November 07, 2013, 11:21:21 AM »
So how would I get it to open a new file?

Left-click the New File icon on HBPC's toolbar
or
Left-click File, select New, then left-click New File

Do you have the latest HBPC 4.3.8?

The above should create you a new empty GPX file named PC_yymmdda.gpx
Right-click on that file name, select Edit, then you can rename it.

« Last Edit: November 07, 2013, 11:24:31 AM by LittleGazoo »

Offline steelebob

  • Full Member
  • ***
  • Joined: May 2011
  • Location: Central NH
  • Posts: 110
  • 1994 TRACKER NITRO 160 and 4 cyl 2017 Yamaha 70 h
  • Unit(s): Helix 2nd gen 10 and 9
  • Accessories: Ulterra
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #8 on: November 07, 2013, 11:42:47 AM »
And doing just that is when I get the error message I first mentioned. Access is denied.[G:\MATRIX\PC_1311....
I do have the latest HBPC 4.3.8
« Last Edit: November 07, 2013, 11:54:23 AM by steelebob »
I dream of things that never were, and ask why not?

Offline LittleGazoo

  • Full Member
  • ***
  • Joined: Jan 2011
  • Location: Big Sandy, TX
  • Posts: 221
  • Unit(s): SOLIX 15 G2, SOLIX 12 G2
  • Software: 3.640
  • Accessories: Ethernet
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #9 on: November 07, 2013, 12:38:25 PM »
Is the G: drive your SD-card reader?
And doing just that is when I get the error message I first mentioned. Access is denied.[G:\MATRIX\PC_1311....
I do have the latest HBPC 4.3.8

Left-click Edit, then Left-Click Preferences and under the General Tab see what the GPX file location says.
IMO, it should be set to the default My Documents\My_HumminbirdPC\GPX_Files location on your PC hard-drive.
You might have My_Documents or Documents depending on your Windows version.

G:\MATRIX folder might now not be a valid folder path.  This location must be a existing folder.
« Last Edit: November 07, 2013, 12:41:44 PM by LittleGazoo »

Offline steelebob

  • Full Member
  • ***
  • Joined: May 2011
  • Location: Central NH
  • Posts: 110
  • 1994 TRACKER NITRO 160 and 4 cyl 2017 Yamaha 70 h
  • Unit(s): Helix 2nd gen 10 and 9
  • Accessories: Ulterra
Re: access is denied.[G:\MATRIX\PC_131105c.gpx]
« Reply #10 on: November 07, 2013, 02:27:12 PM »
Problem Solved. GaZoo strikes AGAIN!!!
I dream of things that never were, and ask why not?


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
4844 Views
Last post April 22, 2009, 03:56:35 PM
by Keith Councell
1 Replies
3788 Views
Last post April 11, 2010, 12:47:59 PM
by RGecy
0 Replies
3103 Views
Last post May 05, 2011, 07:43:52 AM
by inshorecatch
10 Replies
8973 Views
Last post May 10, 2011, 04:16:20 PM
by sonar2000
9 Replies
7497 Views
Last post November 23, 2011, 12:38:31 PM
by Humminbird_Greg
0 Replies
2425 Views
Last post March 22, 2012, 11:13:23 AM
by sonar2000
2 Replies
3129 Views
Last post June 27, 2012, 02:46:43 PM
by Humminbird_Greg
19 Replies
13864 Views
Last post May 13, 2015, 03:45:34 PM
by MGEOD


anything
SimplePortal 2.3.3 © 2008-2010, SimplePortal