Author Topic: Older code for 798ci si.  (Read 4279 times)

0 Members and 1 Guest are viewing this topic.

Offline brpostma

  • Newbie
  • *
  • Joined: Sep 2012
  • Location: raleigh, nc
  • Posts: 4
  • Unit(s): 798 CI SI, 778C
  • Accessories: interlink
Older code for 798ci si.
« on: October 01, 2012, 05:50:06 PM »
I know that humminbird now has 6.300 available for the 798ci Si.  I have not done a good job of saving my old files but now I might want to downgrade from 6.300 to the latest before that.  I see in the download section we have 5.840 and 6.300.  Is 5.840 really the last version before 6.300?   I tried piecing the information together from the humminbird faq but its not clear what code version is intended for what equipment, so thought I would ask.  Ideally looking for a list of the code that could be run on a 798ci si. 

Am looking for the same information for the 778c, if anyone knows where that can be found.

thanks
bp



Offline George

  • Hero Member
  • *****
  • Joined: Mar 2009
  • Location: Porum, Oklahoma
  • Posts: 753
  • Unit(s): 2 - Solix 15s AutoChart Pro 1198
  • Software: Always up todate
  • Accessories: SI on Transom and Trolling Motor
Re: Older code for 798ci si.
« Reply #1 on: October 02, 2012, 06:22:43 AM »
brpostma

You will find the older revisions on this site. 
 
   > http://forums.sideimagingsoft.com/index.php?action=downloads <

You can click on the above and go directly to it or follow Forum > Software Downloads > Humminbird Firmware / Software Updates - Downloads

George

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Older code for 798ci si.
« Reply #2 on: October 02, 2012, 09:36:28 AM »
Let’s see bp…

The latest software for a 798ci Si unit is version 6.300 and the previous version to that was version 5.840 (5.450 before that).

The latest software for a 778c unit is version 6.360 and the previous version to that was version 5.320 (4.960 before that).

Greg Walters at Humminbird
gwalters@johnsonoutdoors.com

Offline brpostma

  • Newbie
  • *
  • Joined: Sep 2012
  • Location: raleigh, nc
  • Posts: 4
  • Unit(s): 798 CI SI, 778C
  • Accessories: interlink
Re: Older code for 798ci si.
« Reply #3 on: October 02, 2012, 10:05:23 AM »
GREAT thanks.!!!!

Any idea where I can get 5.450, and the code for the 778c? 


thanks
bp

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Older code for 798ci si.
« Reply #4 on: October 02, 2012, 11:21:27 AM »
bp,
I believe that they are in the Humminbird Software Download section of this web site:
http://forums.sideimagingsoft.com/index.php?action=downloads;cat=1
Look under the appropriate folder for each model unit.
Greg Walters at Humminbird
gwalters@johnsonoutdoors.com

Offline brpostma

  • Newbie
  • *
  • Joined: Sep 2012
  • Location: raleigh, nc
  • Posts: 4
  • Unit(s): 798 CI SI, 778C
  • Accessories: interlink
Re: Older code for 798ci si.
« Reply #5 on: October 02, 2012, 01:43:28 PM »
my bad, I didnt see that the 778c was on there when i looked yesterday.    Only one I am missing now is the 798ci si 5.450, but maybe I will be fine.  Got some SI troubleshooting to do this Saturday.

thanks
bp

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Older code for 798ci si.
« Reply #6 on: October 03, 2012, 10:56:52 AM »
bp,
Look for the 798ci Si 5.450 software again.  I just looked and it shows as being there.

Now the 788c software may not have been there yesterday when you looked but it showed up soon afterwards!
Greg Walters at Humminbird
gwalters@johnsonoutdoors.com

Offline brpostma

  • Newbie
  • *
  • Joined: Sep 2012
  • Location: raleigh, nc
  • Posts: 4
  • Unit(s): 798 CI SI, 778C
  • Accessories: interlink
Re: Older code for 798ci si.
« Reply #7 on: October 03, 2012, 07:47:38 PM »
Ahh thanks for the 778c.

I see 5.840, but not 5.540 at  http://forums.sideimagingsoft.com/index.php?action=downloads;cat=29

thanks
bp

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Older code for 798ci si.
« Reply #8 on: October 04, 2012, 12:38:55 PM »
Try looking here:
http://forums.sideimagingsoft.com/index.php?action=downloads;cat=8
It looks like someone started a second area for software downloads for the 798ci Si units.

Greg Walters at Humminbird
gwalters@johnsonoutdoors.com


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
6839 Views
Last post April 02, 2009, 06:52:38 AM
by RGecy
4 Replies
3989 Views
Last post March 28, 2012, 06:29:35 PM
by sonar2000
0 Replies
2290 Views
Last post April 22, 2012, 06:32:33 PM
by sonar2000
8 Replies
5139 Views
Last post May 31, 2012, 10:18:51 AM
by sonar2000
6 Replies
6151 Views
Last post June 03, 2012, 10:58:02 AM
by Roddy
6 Replies
4024 Views
Last post June 24, 2012, 04:52:34 PM
by sonar2000
4 Replies
3713 Views
Last post April 08, 2013, 10:28:35 AM
by Humminbird_Greg
1 Replies
2573 Views
Last post April 07, 2016, 12:04:06 AM
by rnvinc


SimplePortal 2.3.3 © 2008-2010, SimplePortal