Author Topic: ERROR: Incorrect checkbit35: at position 35  (Read 11375 times)

0 Members and 1 Guest are viewing this topic.

Offline promapper

  • Jr. Member
  • **
  • Joined: Apr 2013
  • Location: Fayetteville TN
  • Posts: 78
  • Unit(s): 997C SI, 2-998C HD SI, 596C-HD-DI
  • Software: as of 5-08-13
  • Accessories: AS 360, I-Pilot Link, InterLink,Navionic
ERROR: Incorrect checkbit35: at position 35
« on: May 09, 2013, 06:10:55 PM »
Every file I try to convert with the HBSI Converter returns this error. 

ERROR: Incorrect checkbit35: at position 35Has anyone else seen this.

Running a 998 and 6.610 software
Windows 7

other converters will work but will not generate the proper format for Yellowfin


Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #1 on: May 10, 2013, 06:28:55 PM »
I will have this fixed this weekend.

Robert.
Humminbird Guru and Forum Administrator

Offline promapper

  • Jr. Member
  • **
  • Joined: Apr 2013
  • Location: Fayetteville TN
  • Posts: 78
  • Unit(s): 997C SI, 2-998C HD SI, 596C-HD-DI
  • Software: as of 5-08-13
  • Accessories: AS 360, I-Pilot Link, InterLink,Navionic
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #2 on: May 10, 2013, 08:06:19 PM »
you are super!  Thanks for looking into it!

JoeH

  • Guest
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #3 on: December 23, 2013, 10:26:36 AM »
I have downloaded what I believe is the latest version of HBSI (1.1.0.1, Copyright 2013) and I am getting this message.  My unit is a 798CI HD SI COMBO.

The converted .872 file has 0 bytes..  Thanks for any insights.

Offline surveyor

  • Newbie
  • *
  • Joined: Jan 2014
  • Location: Netherlands
  • Posts: 2
  • Hydrographical Surveys
  • Unit(s): 1198C SI Combo
  • Software: 6.740
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #4 on: March 21, 2014, 11:23:44 AM »
Dear RGacy,

Can you PLEASE check why this Error code below keeps popping up in HBSI Convertor?

ERROR: Incorrect CheckBit 35 at Position: 35

I run a Win7 64 Bit window version and a 1197 and 1198 data with older recorded files (old Firmware) and newest Firmware updates.
None helps.
When I run V 1.1.0.1. on a standard Win7 32 Bits 10.1 Inch laptop, it runs fine???

Can you help me or can I work arround that?
I already tried compatibillity with other Window Versions, yet none helps.

Kindest regards and thank you for your reply in advance,

Surveyor

Offline massillonbuckeye

  • Jr. Member
  • **
  • Joined: May 2012
  • Location: Ohio
  • Posts: 20
  • Unit(s): Onix 8nt SI, 788, AC Pro, LM Great Lakes
  • Accessories: Terrova/I-Pilot Link
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #5 on: October 08, 2014, 01:00:18 AM »
I'm still having this error.  Reinstalled a few times now.  My version reads 1.1.0.1.  Its what I download from the downloads section.

Offline abraquelebout

  • volunteer rescue diver, surfer, publicist, submarine archaeology
  • Sr. Member
  • ****
  • Joined: Apr 2010
  • Location: france
  • Posts: 270
  • Unit(s): 898, 1198, helix G2
  • Software: deep,,drdepht,reef.
  • Accessories: towfish lowbird /LSS2-hdsi, 60mcable
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #6 on: October 08, 2014, 12:07:32 PM »
hi
same thing with new upgrade in 1198
my old 898 is no upgraded, no problem.
i think new version of firmware in unit make this....

Offline tambrose76

  • Jr. Member
  • **
  • Joined: Apr 2011
  • Location: NORTHERN, WI
  • Posts: 34
  • USMC Ret.
  • Unit(s): 898c, 737, WIDE ONE, SUPERTRAP30, PORTAB
  • Software: ALWAYS UPDATED
  • Accessories: GPS16 WXSENSE
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #7 on: September 04, 2015, 02:14:24 PM »
4Sep2015... same issue. did this ever get fixed?
"Some men see things as they are and say why.
I dream things that never were and say why not." --George Bernard Shaw

Offline abraquelebout

  • volunteer rescue diver, surfer, publicist, submarine archaeology
  • Sr. Member
  • ****
  • Joined: Apr 2010
  • Location: france
  • Posts: 270
  • Unit(s): 898, 1198, helix G2
  • Software: deep,,drdepht,reef.
  • Accessories: towfish lowbird /LSS2-hdsi, 60mcable
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #8 on: September 05, 2015, 06:02:58 AM »
No it's not fixed, if you want to use deepviewer, convert .dat in xtf with son2xtf and open it in deep. it's working.
waiting for next hbsi sonar data file converter.

Offline muskyhntr

  • Newbie
  • *
  • Joined: May 2021
  • Location: MD
  • Posts: 4
  • Unit(s): Helix 8 MegaSI
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #9 on: October 25, 2021, 08:39:49 PM »
Is there any way to work around this error and get the HBSI Sonar File Converter to work? I am trying to convert HB.DAT file to .DVS to view with Deep Vision app.

Thanks!

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #10 on: October 26, 2021, 02:33:57 AM »
Hi muskyhntr

Welcome to the forum

As abraquelebout writes, convert .son to .xtf with the help of son2xtf, which Deep Vision can read.


http://forums.sideimagingsoft.com/index....sa=view;down=26

mvh
Rudiger

Offline muskyhntr

  • Newbie
  • *
  • Joined: May 2021
  • Location: MD
  • Posts: 4
  • Unit(s): Helix 8 MegaSI
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #11 on: October 26, 2021, 07:17:10 AM »
Rudiger, thank for the quick reply! I have been trying to find the Son2xtf file with no success. Unfortunately, I got an error 404, file not found message on the link you provided. All help is greatly appreciated.
Muskyhntr

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #12 on: October 27, 2021, 02:52:37 AM »

Offline muskyhntr

  • Newbie
  • *
  • Joined: May 2021
  • Location: MD
  • Posts: 4
  • Unit(s): Helix 8 MegaSI
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #13 on: October 27, 2021, 09:12:18 PM »
Son2XTF must be the most elusive application on the web! I tried the link, but I got a message that .NET framework 1.1 needed to be downloaded. I'm using Windows 10 with .NET 4.8. .Net framework 1.1 is no longer supported or available from the .NET site.  :'(
Any help appreciated.
Muskyhntr

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #14 on: October 28, 2021, 02:48:30 AM »
Hi Muskyhntr

I need your email address.

mvh
Rüdiger

Offline muskyhntr

  • Newbie
  • *
  • Joined: May 2021
  • Location: MD
  • Posts: 4
  • Unit(s): Helix 8 MegaSI
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #15 on: November 05, 2021, 08:08:42 PM »
PM sent. Thanks.

Offline tournevase

  • ARCHAEOLOGICAL SURVEY
  • Jr. Member
  • **
  • Joined: Oct 2021
  • Location: france
  • Posts: 32
  • ARCHAEOLOGICAL SURVEY
    • GRAS
  • Unit(s): HELIX 10 G4N CHIRP MEGA SI +
  • Software: AUTOCHART PRO
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #16 on: January 13, 2022, 05:17:21 PM »
hello all
i want to use yellowfin
the only one converter is HBSI gives yet "ERROR: Incorrect CheckBit 35 at Position: 35" and issue  empty .872 files  :'(
is there an improvment ?
Tournevase

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #17 on: January 14, 2022, 03:37:55 AM »
Hi Tournevase

Which converter do you want to install?

mvh
Rüdiger

Offline tournevase

  • ARCHAEOLOGICAL SURVEY
  • Jr. Member
  • **
  • Joined: Oct 2021
  • Location: france
  • Posts: 32
  • ARCHAEOLOGICAL SURVEY
    • GRAS
  • Unit(s): HELIX 10 G4N CHIRP MEGA SI +
  • Software: AUTOCHART PRO
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #18 on: January 14, 2022, 08:11:58 AM »
i used "HBSI file sonar converter" to convert hummin files to .872 because yellowfin use .872
when i launch the conversion i get "ERROR: Incorrect CheckBit 35 at Position: 35" and an empty .872 file is created
then impossible to use yellowfin
Tournevase

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #19 on: January 15, 2022, 03:54:32 AM »
Hi Tournevase

Try DeepView https://deepvision.se/download/sonar-software/ and the Son2xtf converter  http://forums.sideimagingsoft.com/index.php?action=downloads;sa=view;down=26 , works with win 10. 

mvh
Rüdiger

Offline tournevase

  • ARCHAEOLOGICAL SURVEY
  • Jr. Member
  • **
  • Joined: Oct 2021
  • Location: france
  • Posts: 32
  • ARCHAEOLOGICAL SURVEY
    • GRAS
  • Unit(s): HELIX 10 G4N CHIRP MEGA SI +
  • Software: AUTOCHART PRO
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #20 on: January 24, 2022, 11:45:26 AM »
hi rûdiger
i  used deepview fv
the display at screen has a good accuracy
my aim is to get pictures in png or jpg for publications with the best accuracy
by using deepview fv the way is : convert .dat of the hummibird to  xtf -> dvfv generate a pdf -> i convert the pdf in image format
i'am not sure that it gives the best image

finally the qustion is how to get an image  with the resolution of the ra
Tournevase

Offline tournevase

  • ARCHAEOLOGICAL SURVEY
  • Jr. Member
  • **
  • Joined: Oct 2021
  • Location: france
  • Posts: 32
  • ARCHAEOLOGICAL SURVEY
    • GRAS
  • Unit(s): HELIX 10 G4N CHIRP MEGA SI +
  • Software: AUTOCHART PRO
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #21 on: January 24, 2022, 11:47:15 AM »
sorry
finally the question is how to get an image  with the resolution of the raw original file ? 1 px = 1 sampling pitch
Tournevase

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: ERROR: Incorrect checkbit35: at position 35
« Reply #22 on: January 26, 2022, 03:39:46 AM »
Hi Tournevase

I've never done that myself, so I can't help you there. Maybe there is another user here in the forum who can help you.

mvh
Rüdiger


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
10492 Views
Last post August 05, 2009, 09:34:43 AM
by sonar2000
17 Replies
16859 Views
Last post December 23, 2010, 09:23:09 AM
by sonar2000
13 Replies
12041 Views
Last post March 27, 2011, 03:46:51 PM
by KickSomeBass
6 Replies
8758 Views
Last post February 03, 2012, 04:26:18 PM
by sonar2000
10 Replies
24263 Views
Last post February 15, 2012, 11:28:03 AM
by Humminbird_Greg
4 Replies
8248 Views
Last post April 11, 2012, 08:49:42 AM
by sonar2000
1 Replies
6262 Views
Last post May 14, 2013, 05:50:23 PM
by Humminbird_Greg
6 Replies
9458 Views
Last post April 06, 2015, 04:25:04 PM
by steelebob


SimplePortal 2.3.3 © 2008-2010, SimplePortal