Humminbird Side Imaging Forums
General => General Discussion => Topic started by: Charlie1 on May 25, 2014, 04:25:07 PM
-
How do I make a Ethernet connection between 899 & 859
-
You will need an Ethernet cable of the correct length and (2) adapter cables. The adapter cables make the transition from the Ethernet cable connectors to the connector required for your units.
Just plug it all together, make the settings you want in your units (shared transducers or whatever) and your good to go.
-
Welcome to the Humminbird Side Imaging Forums Charlie1.
Trout Bum is correct. You will need two (2) of the AS-EC-QDE Ethernet Adapter cables plus an AS-EC-XXE cable of the correct length. That AS-EC-XXE cable comes in 2, 10, 15, 20 and 30-foot lengths and the length of the cable replaces the “XX” in the part name. So a 10-foot cable would be AS-EC-10E.
As far as sharing transducers goes; you will need to make sure that both units are running the correct software version (6.940 or higher). You can check your “My Humminbird” account to see if it is available yet.
What model 859 do you have:
859ci HD
859ci HD DI
859ci HD XD