Humminbird Side Imaging Forums
Side Imaging Forums => Helix Series Units => Topic started by: Ninjafied on September 14, 2020, 11:15:32 PM
-
ok so to start i have a helix sonar gps on the bow using the transducer on my ulterra i pilot link mega down imaging trolling motor, the ulterra is networked to my console unit a helix 10 g2n mega si. the console unit has a splitter to the mega si transducer and a standard 2d transducer, both of these transducers are on the transom. the images on the console are perfect but on the bow unit im getting so much interference i cant use the sonar. i know the interference is from the 2d transducer as it was only installed a week ago but what i don't know is if there is any setting i should be looking for to clear it up.
any advice is welcome
thanks,
ninjafied
-
Does the interference go away on the bow unit if the console unit is powered off ...??
Rickie