Humminbird Side Imaging Forums

Side Imaging Forums => 997c SI, 998c SI & 999ci HD SI => Topic started by: jimmythegreek on April 01, 2013, 04:57:24 PM

Title: help w 998 readouts
Post by: jimmythegreek on April 01, 2013, 04:57:24 PM

I got another boat and am using my 998 and 958 between them.  Had the boat out for a water test saturday after 3 weekends of rigging and customizing and noticed my TEMP readout shows "COG" and numbers instead of lets say 48 degrees.  I couldnt find anywhere to change this setting.  Can someone please show me the light as to get degrees back.  It seems my partner noticed the screen go back to degrees at one point after another power off cycle and I only saw COG not degrees

Title: Re: help w 998 readouts
Post by: Humminbird_Greg on April 02, 2013, 09:09:02 AM

jtg,
On some of the Views the digital readouts are locked as to what they can show.  Some of this may only be when you are using the cursor or going to a waypoint.  The menu to change the digital readouts is called “Select Readouts” and it is under the Setup menu tab.

Title: Re: help w 998 readouts
Post by: easysailor on April 22, 2013, 09:40:51 PM

This happens on all navigation screens since the latest update, it doesn't happen on non navigation screens. All you correctly selected readouts show up. It needs to be fixed.