Other Humminbird Products > Matrix Series Fishing Systems

Needing transducer for matrix 37

<< < (3/3)

Humminbird_Greg:
It would not Bill without a menu change.  In shallow water the DI model units utilize the DI sonar for water depth.  A way around this is to set the Digital Depth Source menu to the “2D” setting and use a basic 200kHz transducer (like the 200kHz sonar in the XHS-9-HDSi-180-T transducer).  With this menu setting the 587ci HD DI unit will use the 200kHz 20 degree sonar beam to determine water depth but it’s DI sonar will be connected to the right Si sonar beam of the HDSi transducer.  So while you will get some DI sonar it will not be straight down under the boat but be from the right side of the boat.

Navigation

[0] Message Index

[*] Previous page