Side Imaging Forums > Solix

solix 12 G3 Mega+ side image wave lines

(1/1)

jimf:
I get this white wave lines on the left side of Mega+ Its doesn't show up on 800 Khz or 455 Khz. Only on the Mega+ I have a picture attached. I was thinking try to set the sharpens ?

jimf:
What i did I turned the SI Sensitivity offset to -7 and the white wave lines went off the screen. If i turn the SI sensitivity offset the opposite way to say 6 or 7 the white wave lines come very close to the central of the screen.
Looks like if I turn SI sensitivity offset to -7 it gos away.

Is that what the SI Sensitivity offset is for ? Because it worked BUT i will see what it really looks like on the water when I go out again.

JIM

rnvinc:
“SI Sensitivity offset” adjusts the left panel of the SI view if that left SI view is consistently brighter or darker than the right SI panel  ...

If there is not another unit running the same frequency (which can cause crosstalk interference) - try Sonar Restore Defaults or full Restore Defaults  ...

Rickie

Navigation

[0] Message Index