Humminbird Side Imaging Forums
Side Imaging Forums => Solix => Topic started by: Jopple on September 16, 2022, 09:45:29 AM
-
Hi all,
Having an issue with my Solix and Mega 360 in that it won't record the 360.
Solix 15 MSI+ G3 Software Version 4.0.70.(06/09/22 19:23)
Mega 360 Imaging V1.070
The 360 works fine, and recording SI is no problem but if I try to record just 360, the "start recording" button does nothing and just stays there. If I select SI and 360 it appears to start recording but then reviewing the recorded files, there is no 360 data.
Anyone got any ideas?
-
Send me your recordings with at least one full 360 turn. I'll look into it and if the angle value is stored in the files I would implement a 360 view in HummSucker.
-
Hi,
There isn't a recording to send to you. That's the problem.
It only records when in SI or DI mode - it's not recording any 360 data. In the recordings list there is no indicator in the 360 column.
If I try to record a 360 file only, the recording never starts at all.
-
It should be possible.
Found this
http://www.bbcboards.net/showthread.php?t=425537&p=4144982&viewfull=1#post4144982 (http://www.bbcboards.net/showthread.php?t=425537&p=4144982&viewfull=1#post4144982)
It's only SI but maybe the angles are saved in the xxx2 and xxx3 son files.
Could you record SI if using 360?
-
See if anything here helps ...
http://www.bbcboards.net/showthread.php?t=1095984&highlight=SOLIX+recording (http://www.bbcboards.net/showthread.php?t=1095984&highlight=SOLIX+recording)
Rickie
-
Does it work now?
-
No, it has been raised with Humminbird support who are checking to see if there is a firmware issue. It's been about 2 weeks so far. Once I get an answer/solution I will post back here with the resolution.
-
Just to keep things rolling -
Current release for the Solix is - SOLIX G3 Series v. 4.130 Released February 9, 2023 which does not work.
Humminbird has acknowledged there is a problem and will be fixing it in the next firmware release, hopefully soon!
-
The new firmware for the SOLIX has been released:-
SOLIX (all models) 4.190
Released October 5, 2023
I have tested this and can now confirm the 360 scans are now being recorded.