Humminbird Side Imaging Forums
Side Imaging Forums => Helix Series Units => Topic started by: fishinman on August 30, 2017, 04:16:06 PM
-
When I scroll over to "views" on my Helix 10, not all the available views are showing up...
What am I missing or need to do?
Thanks
-
2 possibilities ...
*Chart views will not be available until the satellites are acquired by the unit ...
*The Connected Transducer Menu under the Sonar tab has been changed to a different xducer than the stock xducer ...
Restore Defaults will set the Connected Transducer back to the factory setting if you don't know which xducer came with the unit ...
Which HELIX 10 do you have ...??
Rickie
-
Do you have all the views turned "on"? When I turned mine on I had to tell it what views I wanted and didn't want.
-
Also make sure you are in advanced mode.
-
Thanks for the replies.... I will look into all of those.... I'm inclined to think it's either the satellite acquisition or transducer...will let you know...
Again, thanks
Gary
-
Yep.... Was on wrong transducer.... Beats me how it got changed...all is good...
Thanks, guys!
Gary