Side Imaging Forums > 1197c SI, 1198c SI & 1199ci HD SI

AC/DC Power Adapter

(1/2) > >>

George:
Not sure if this belongs in the General Discussion or under specific units.

Is there a recommended 110v power adapter for the SI units?

If so what is the safest way to make one up and what components are needed?

I would guess there are some electronic engineers out there that could match the proper power converter to the units.

I believe we need: an HB power cable and an in-line fuse (or maybe 2 one for each side), leaving the power supply to be spec'd out.

If someone in the know has a recommendation please go through the process of setting up and testing the supply system.

Thanks, George



RGecy:
George,

Each unit (1197, 997, 797, etc) has different power consumption requirements.  The 1197c draws just over 1A.  To be safe, a 12v 2A switching or regulated power supply will work for all units with the appropriate inline 3A fuse recommended.  I purchased a new Power Cord PC-11 , $14 from Humminbird and the 12v 2A PS from Digikey.com , $19.

You will need solder or crimp some connections, making sure you connect the positive and negatives correctly.

Good Luck,

Robert

George:
Thanks Bob,

It is better to be safe then sorry, I will purchase a power supply from Digikey. 

George

wallgeye:
I saw on E-bay the power supply that retail outlets use to run their displays for in the store.  I did not have my HB yet so just wished I could find one for my Lowrance unit.  Now that I have the HB I cannot find the things anymore! They looked slick, had connectors to plug right into the back of the units, and into a wall outlet on the other.  Might poke around there once or twice.  You might get lucky and find one of those, cant believe they dont sell them to us.

Humminbird_Greg:
The e-bay web address I have for this guy comes up that it was pulled from the web site.  Maybe he sold them all?

We use a different type power supply system for display units now.  We cannot sell them or the ones you saw due to FCC regulations.

Navigation

[0] Message Index

[#] Next page

Go to full version