Other Interest > DIY - Side Scan Sonar and towfish
Helix G3 and towfish
abraquelebout:
Hi
No extra sealing for the cable entry, for moment max deep use with 100 m cāble is 45 m, no problem, but it's true, the sealing seem's not strong.
Chris_NSB:
I believe the transducer is potted in some type of resin. I had an older 798 that was stored in a hot garage and something that looked like resin oozed out of it. So I think it's likely safe at depth.
Also, I'm just finishing up building my own Helix 9 G2 DIY towfish. Let me know what you think:
abraquelebout:
hi chris
it seem's good
if you want to know what is in ducer there is repply in forum
http://forums.sideimagingsoft.com/index.php?topic=10052.0
nan1:
Hi
What about the Helix G3 tests?
With 50 metres cable the résults in 455 chirp and 1300 are very Good. What about 800 hertz?
Have you similar résults with 80 m or 100 m cable?
Bravo et merci for sharing your researchs
Bernard
abraquelebout:
hi Bernard
now whe use two towfishs with 80 m cāble for deep water and one with 20 m for under 12 m depth
all frequencies give good result but whe can see a little lost signal in coverage distances.
this pics is with chirp at 1000 / 1300 in river made with 20m tow cāble , it's an old wreek protected with bidim and sand bags
and this is 2 canons with the 80m cāble towfish in salt water at 455 khz chirp
it's interesting ::::whe lost use 800khz chirp ....may be a try in fiew weeks...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version