Humminbird Side Imaging Forums

Side Imaging Forums => Helix Series Units => Topic started by: fishinman on August 30, 2017, 04:16:06 PM

Title: Helix 10 views help?
Post by: fishinman on August 30, 2017, 04:16:06 PM
When I scroll over to "views" on my Helix 10, not all the available views are showing up...
What am I missing or need to do?

Thanks
Title: Re: Helix 10 views help?
Post by: rnvinc on August 30, 2017, 08:27:47 PM
2 possibilities  ...

*Chart views will not be available until the satellites are acquired by the unit  ...

*The Connected Transducer Menu under the Sonar tab has been changed to a different xducer than the stock xducer  ...

Restore Defaults will set the Connected Transducer back to the factory setting if you don't know which xducer came with the unit  ...

Which HELIX 10 do you have  ...??

Rickie
Title: Re: Helix 10 views help?
Post by: fshndude on August 30, 2017, 09:02:03 PM
Do you have all the views turned "on"? When I turned mine on I had to tell it what views I wanted and didn't want.
Title: Re: Helix 10 views help?
Post by: Bob B on August 30, 2017, 09:53:50 PM
Also make sure you are in advanced mode.
Title: Re: Helix 10 views help?
Post by: fishinman on August 30, 2017, 09:57:19 PM
Thanks for the replies.... I will look into all of those.... I'm inclined to think it's either the satellite acquisition or transducer...will let you know...

Again, thanks
Gary
Title: Re: Helix 10 views help?
Post by: fishinman on September 02, 2017, 02:12:37 PM
Yep.... Was on wrong transducer.... Beats me how it got changed...all is good...
Thanks, guys!

Gary
SimplePortal 2.3.3 © 2008-2010, SimplePortal