Humminbird Side Imaging Forums

Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: ricqik on August 11, 2015, 11:40:28 AM

Title: Can't mark waypoints on 360 screen when moving cursor
Post by: ricqik on August 11, 2015, 11:40:28 AM

I have two 1199's(console & bow) and 360 that are all linked via the 5PXG. Prior to linking them, on the 360 screen, I was able to move my cursor to whatever object/structure I see on the 360 and mark the waypoint. Ever since they are all linked, I can no longer mark waypoints if I move my cursor. I can however still mark waypoints on my 360 if I don't move the cursor. It sucks because now I have to move my boat over on top of the said desired location to mark it when before I could just move my cursor to it and mark it. Am I missing something? A setting? Does both units have to display 360 to mark? Inputs are appreciated.

Title: Re: Can't mark waypoints on 360 screen when moving cursor
Post by: rnvinc on August 12, 2015, 08:59:08 PM

Have you tried to perform this task on both 1199's while everything is running ...??

Rickie

Title: Re: Can't mark waypoints on 360 screen when moving cursor
Post by: rnvinc on August 12, 2015, 09:38:11 PM

Also see if this helps ...

(http://i477.photobucket.com/albums/rr134/rnvinc/HB/8B86393B-7805-4A52-81AA-FE35C1AF5155_zpsxcwgax7m.png) (http://s477.photobucket.com/user/rnvinc/media/HB/8B86393B-7805-4A52-81AA-FE35C1AF5155_zpsxcwgax7m.png.html)

Rickie

Title: Re: Can't mark waypoints on 360 screen when moving cursor
Post by: ricqik on August 12, 2015, 10:35:00 PM

I'll try both this tomorrow, will report back.