Side Imaging Forums > Solix

2d transducer lost

(1/1)

Skeeter07:
Got solix units networked and was picking sonar sources.  I picked for depth 1 the transducer that's connected to unit but said selected 2d transducer (Lost).  After a few min. lost went away.  See picture.  Why would lost show when it connected to unit I was setting it up?  Also why are there two gps and depth to pick?  Is 2 in case number 1 fails? Thanks.

rnvinc:
Networking is designed to "look for" the next best source if the selected source is lost for any reason  ...

A source "Lost" indicates a bad connection or a failing device  ...

You might disconnect and reconnect the xducer connector to see if there may be a bad connection  ...

Rickie

TroyBoy30:
it will also show lost on a transducer that has pinging turned off.  there are 2 options for a main and a backup.  some options have as many as 4 options

Navigation

[0] Message Index