Humminbird Side Imaging Forums

Side Imaging Forums => 997c SI, 998c SI & 999ci HD SI => Topic started by: j2000 on August 02, 2013, 03:04:02 PM

Title: How to get complete Log include Temperature reading ?
Post by: j2000 on August 02, 2013, 03:04:02 PM

Hi, i can take log on 998 Coordinate, Depth etc...
But Temperature didnt include on the log file...

How to get temperature Log file from 998 ?
Or it must buy another sensor as i want to log it...?

Regards

Joel

Title: Re: How to get complete Log include Temperature reading ?
Post by: Humminbird_Greg on August 02, 2013, 04:15:45 PM

You should be able to get the water temperature readout along with coordinate data from the NMEA 0183 output.  I don’t think that it is included with the sonar recordings.

Title: Re: How to get complete Log include Temperature reading ?
Post by: j2000 on August 06, 2013, 05:26:40 PM

Thanks greg,
i test read original data from unit its ok, there's already temperature data on the unit if i play from unit.
------------------------------------------------
Any external parts i need for get NMEA 0183 output ?


Regards

Joel

Title: Re: How to get complete Log include Temperature reading ?
Post by: Humminbird_Greg on August 07, 2013, 01:00:05 PM

Nope.  Just connect to the White and Black wires that are in the NMEA pigtail wire.  This is the second, shorter cable that comes out of the GPS Receiver’s connector.  White is the NMEA+ output and Black is the NMEA Ground.