Humminbird Side Imaging Forums
Side Imaging Forums => Helix Series Units => Topic started by: Cutaway70 on June 27, 2016, 10:03:46 AM
-
Thanks for the add. Recently purchased this spring. I have moved transducer 4 times and still same problem. I get false bottom reading. i am in 8ft water and digital display says 19ft when in 2d i have 2 readings one at correct depth and one at 19ft. Think i tried everything but nothing seems to work. Any suggestions would be appreciated. I am running the teansducer that came with unit should i upgrade to the hdsi.
-
Have you tried to go to switchfire clear and reduce the sensitivity? If you are going to mostly in shallow water, sometimes setting the max depth to a number a little more than your actual depth will help also.....just remember it has been changed when you get into deeper water.
You probably have a hard bottom area.
-
Hello everyone & Thanks for add.
I have had the same problem in my unit (helix 9 SI ) Humminbird Spain has changed the unit & transducer for a new other and I still have to go water to test it.
I had wrongs reads in a DELTA RIVER this bottom its very soft...
Regards[attachimg=1]