Humminbird Side Imaging Forums

Side Imaging Forums => 898c SI => Topic started by: maachuu on July 03, 2013, 10:17:28 PM

Title: Need to verify that the cable I need to connect a second
Post by: maachuu on July 03, 2013, 10:17:28 PM

transducer to my 898 is the AS-SI-DB-Y. Will be connecting the SI ducer that came with the 898 and a XNT-9-20-T, so that I can mount the XNT-9-20-T lower on the transom to try and get depth reading while on plane at speed. Just wanted to make sure before I ordered



thanks

maachuu

Title: Re: Need to verify that the cable I need to connect a second
Post by: maachuu on July 03, 2013, 11:24:06 PM

after more research and reading, I have ordered the AS-SI-DB-Y cable, it is what I need to do the job I do believe :)

Title: Re: Need to verify that the cable I need to connect a second
Post by: rnvinc on July 04, 2013, 11:25:04 AM

Here is good info on installing the shoot thru hull xducer...
 
Be sure and test the install spot before epoxying...
 
http://www.bbcboards.net/humminbird-sonar-gps/172972-installation-networking-information-resource.html#post1538600 (http://www.bbcboards.net/humminbird-sonar-gps/172972-installation-networking-information-resource.html#post1538600)
 
Rickie