Author Topic: to see left side imaging sides on one screen and right on another  (Read 5958 times)

0 Members and 1 Guest are viewing this topic.

Offline danlaboucane

  • Jr. Member
  • **
  • Joined: Mar 2017
  • Location: quebec
  • Posts: 77
  • Unit(s): ,798 hd onix8 ct , solix 12 msi
  • Software: 7.6 ,3.03
  • Accessories: sm3000+eth 5 port to get SI on onix CT,
how to see left side imaging side on one screen and right on another ? do i need two transducers ? each connected to different units or can i share a different side of the SI by ethernet ?


Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • Location: Western KY
  • Posts: 4326
  • Unit(s): 1197c SI Combo, SOLIX G2 MSI
  • Software: Dependent on whim
  • Accessories: AS GRHA, MEGA 360, LowBird LSS 1 & 2
Re: to see left side imaging sides on one screen and right on another
« Reply #1 on: December 03, 2017, 10:01:24 AM »
The only SI/SI Combo view available is the stacked SI view as seen below with version 1.350 in HELIX series  ...(Not sure the version number in ONIX or SOLIX)  ...



This view can be created with both left SI data and right SI data coming from the same SI xducer  ...

Or from 2 SI xducers using the AS SILR Y cable for HELIX G1 series  ...
https://www.humminbird.com/productDetail-Accessory.aspx?Pageid=728&id=977

Or from 2 SI xducers using the SM SILR Y Cable for HELIX MEGA series  ...
https://www.humminbird.com/Products/SM-SILRY/

Or from 2 SI xducers using the AS 14 SILR Y Cable for ONIX series  ...
https://www.humminbird.com/productDetail-Accessory.aspx?Pageid=728&id=3321

Or from 2 SI xducers using the SM SILR Y Cable for SOLIX series  ...
https://www.humminbird.com/Products/SM-SILRY/
-----

Left SI data and right SI data cannot be shared separately thru Ethernet  ...

Rickie
« Last Edit: December 03, 2017, 10:10:11 AM by rnvinc »

Offline danlaboucane

  • Jr. Member
  • **
  • Joined: Mar 2017
  • Location: quebec
  • Posts: 77
  • Unit(s): ,798 hd onix8 ct , solix 12 msi
  • Software: 7.6 ,3.03
  • Accessories: sm3000+eth 5 port to get SI on onix CT,
Re: to see left side imaging sides on one screen and right on another
« Reply #2 on: December 03, 2017, 10:46:58 AM »
but if i use two onix SI units connected to two different transducers can i choose to display right side on right screen and left  side on the left screen ? and still be ethernet connected ? i would use that when trolling and bring a unit on the bow when casting .

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • Location: Western KY
  • Posts: 4326
  • Unit(s): 1197c SI Combo, SOLIX G2 MSI
  • Software: Dependent on whim
  • Accessories: AS GRHA, MEGA 360, LowBird LSS 1 & 2
Re: to see left side imaging sides on one screen and right on another
« Reply #3 on: December 03, 2017, 10:53:25 AM »
but if i use two onix SI units connected to two different transducers can i choose to display right side on right screen and left  side on the left screen ? and still be ethernet connected ? i would use that when trolling and bring a unit on the bow when casting .

I'm afraid not  ... Sharing SI thru Ethernet specifies SI from "Unit 1" or SI from "Unit 2"  ... which, in effect, requires sharing "left SI data and right SI data"..

There is no selection choice to share "left SI data or right SI data"  ...

Rickie
« Last Edit: December 03, 2017, 11:18:43 AM by rnvinc »

Offline danlaboucane

  • Jr. Member
  • **
  • Joined: Mar 2017
  • Location: quebec
  • Posts: 77
  • Unit(s): ,798 hd onix8 ct , solix 12 msi
  • Software: 7.6 ,3.03
  • Accessories: sm3000+eth 5 port to get SI on onix CT,
Re: to see left side imaging sides on one screen and right on another
« Reply #4 on: December 03, 2017, 11:44:07 AM »
ok thanks rickie, but i would still be able to isolate right and left on the two units at console ?

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • Location: Western KY
  • Posts: 4326
  • Unit(s): 1197c SI Combo, SOLIX G2 MSI
  • Software: Dependent on whim
  • Accessories: AS GRHA, MEGA 360, LowBird LSS 1 & 2
Re: to see left side imaging sides on one screen and right on another
« Reply #5 on: December 04, 2017, 09:44:39 PM »
ok thanks rickie, but i would still be able to isolate right and left on the two units at console ?

Correct  ... And probably a better option anyway so that left SI can be full screen on the left unit and right SI could be full screen on the right unit  ...

Rickie


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
9914 Views
Last post April 16, 2012, 10:48:52 PM
by Shooter00
4 Replies
6821 Views
Last post September 14, 2012, 04:27:47 PM
by gros21
17 Replies
12768 Views
Last post March 14, 2013, 04:37:52 PM
by Rickard
3 Replies
8749 Views
Last post February 27, 2014, 08:35:33 PM
by Rotus623
0 Replies
7210 Views
Last post March 22, 2015, 01:10:07 AM
by vik33
0 Replies
4240 Views
Last post June 08, 2015, 04:45:38 AM
by vik33
6 Replies
8996 Views
Last post June 21, 2016, 11:33:31 AM
by Bob B
1 Replies
2170 Views
Last post September 07, 2020, 09:33:15 PM
by rnvinc


SimplePortal 2.3.3 © 2008-2010, SimplePortal