Author Topic: Side Scan Sonar  (Read 12516 times)

0 Members and 1 Guest are viewing this topic.

Offline jasondiver

  • Newbie
  • *
  • Joined: Oct 2013
  • Location: Florida
  • Posts: 3
Side Scan Sonar
« on: December 16, 2013, 07:20:19 PM »
Good evening everyone,

Hope you are having a good day. I would like to hire someone to build a towfish and equipment for a side scan sonar project. I am college student and study underwater crime scene investigation program at Florida State University. If you are interested then contact me

Thanks
Jason


Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Side Scan Sonar
« Reply #1 on: December 17, 2013, 12:15:29 AM »
Jason,

Welcome to the forum.  There are quite a few members who have built quality towfish and I am sure would be willing to help you.  If no one else responds, I can certainly put one together for you or recommend someone who can.

Good Luck,

Robert Gecy
Humminbird Guru and Forum Administrator

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: Side Scan Sonar
« Reply #2 on: December 17, 2013, 04:42:39 AM »
Hi Jason

In this forum you will find several of homemade towfish.
Surf a bit by the  DIY - Side Scan Sonar and towfish section and if you have specific questions each of us will be glad to help you.

mvh
Rüdiger

Offline jasondiver

  • Newbie
  • *
  • Joined: Oct 2013
  • Location: Florida
  • Posts: 3
Re: Side Scan Sonar
« Reply #3 on: December 18, 2013, 10:09:27 PM »
All right, I would like to build a tow fish and want to use sonar software on my MacBook Pro. Anyone would guide me how to build it and find the software? I appreciate it.

Thanks

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: Side Scan Sonar
« Reply #4 on: December 19, 2013, 04:35:20 AM »
Hi Jason

A towfish consists of a slender elongated arms (tubular or rod) of 80-120 cm in length. At the front end a ballast weight and at the rear end, a empennage (wing or the pipe ends). Approximately at the end of the third and the bottom of the transducher fixed in the match area on the upper side there is a hole rail for vareablen attachment of the trailing cable.
The weight of the towfish and the cable length is ausschlagged For the achievable towing depth. As trailing cables come very expensive special cables or cheaper network cable (Cat 7) with self-made strain relief up to a length of 120m used. Another possibility is the extension cable of HB (max, 3x10m, 5x will certainly work) that must be provided with an additional strain relief.

mvh
Rüdiger

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Side Scan Sonar
« Reply #5 on: December 19, 2013, 08:57:22 AM »
I like that towfish design!  ;). How's it working for you?

Robert
Humminbird Guru and Forum Administrator

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: Side Scan Sonar
« Reply #6 on: December 19, 2013, 09:08:30 AM »
Hi Robert

I think the design I stole from you 8), a lot of experience so I have not yet, but it is running well behind the boat.

mvh
Rüdiger

Offline jasondiver

  • Newbie
  • *
  • Joined: Oct 2013
  • Location: Florida
  • Posts: 3
Re: Side Scan Sonar
« Reply #7 on: May 25, 2014, 02:48:49 PM »
I would like to hire someone will build towfish for me please but I have MacBook Pro and don't know where can i get software for the side scan sonar! Please message me about hiring someone can build it for me.

Offline Rüdiger

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Posts: 493
Re: Side Scan Sonar
« Reply #8 on: May 26, 2014, 03:27:49 AM »

Hi Jason

Here in the forum there was already a link to a venal towfish (but no transducher and towing cables), which was made of an iron pipe.
You must therefore look for something in the forum.

mvh
Rüdiger


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
11 Replies
16602 Views
Last post April 06, 2010, 03:58:14 PM
by Chiboo
2 Replies
9615 Views
Last post January 29, 2012, 03:41:11 AM
by Rüdiger
7 Replies
10023 Views
Last post September 12, 2012, 03:44:52 AM
by abraquelebout
7 Replies
6011 Views
Last post March 20, 2014, 06:04:07 AM
by peterv6i
4 Replies
6127 Views
Last post August 13, 2015, 12:10:16 PM
by rjscuba
2 Replies
2964 Views
Last post May 09, 2019, 09:02:22 PM
by rnvinc
2 Replies
4004 Views
Last post August 03, 2019, 11:22:25 PM
by Gimp
0 Replies
2305 Views
Last post March 12, 2023, 06:21:16 PM
by Glennk


SimplePortal 2.3.3 © 2008-2010, SimplePortal