Humminbird Side Imaging Forums
General => General Discussion => Topic started by: Steve Schmidt on September 07, 2013, 08:57:10 PM
-
All,
A buddy I fished with on the Red River with had his Lowrance with an internal GPS and he saved all the GPS and Trails. He has saved them as a GPX from his URS version 4. For some reason I can not use the Humminbird software to read the SD card so I can transfer the data to my units. Is there someone here that can point me to the right direction.
Thanks
-
This should help do what you need. This came from the Frequently Asked Questions section on the Humminbird site you can find a lot of information in the FAQ section.
http://www.humminbird.com/FAQ.aspx?ContentId=1738 (http://www.humminbird.com/FAQ.aspx?ContentId=1738)
-
I’m thinking that you had to save the waypoint data in their version 2 format (or was it 3?...) not in the version 4 format.
-
Version 3 format is the one that you need to use, I found that information somewhere on the Humminbird site over a year ago when I converted waypoints from my old Lowrance units to my new Humminbird units but do not remember where I found that information.