Topic: 698 SI surface clutter

[Buzzy McGraw]

Moved
Having the same problem with my 698 SI. It didn't have a problem the first couple times out but is doing it now. Motor on/off trimmed up/dn doesn't matter. Different water didn't change. I noticed yesterday that it has 2 distinct lines on right side now. Unit is only 2 wks old. Transducer problem?

[Buzzy McGraw]

Can't post any pics. Tried the same pic as previous post and says its too large?!

[rnvinc]

Try using photobucket for posting pix ... 

And pix of your xducer install would be beneficial ...

Rickie

[Buzzy McGraw]

http://i106http://i1065.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zps5cutu3la.jpg5.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zpsmxsgbnqq.jpg

[Buzzy McGraw]

[Buzzy McGraw]

Ahh. I figured out the pics!

[Buzzy McGraw]

[rnvinc]

It's picking up the Outboard mount and the toon on the other side ...

The SI beams reach all the way up to the water's surface left and right ...

You can verify this by removing the xducer and sticking it farther down in the water on a stick or pole of some sort ...

Pontoon installations benefit from dual SI xducer setups with the AS SILR Y cable ...

http://www.humminbird.com/Products/AS-SILR-Y/

Rickie