Author Topic: 360 with Solix & ice fishing  (Read 1241 times)

0 Members and 1 Guest are viewing this topic.

Offline Ahvena

  • Newbie
  • *
  • Joined: Feb 2018
  • location: Finland
  • Posts: 4
  • Unit(s): Solix 12 SI Mega
  • Accessories: 360 TM
360 with Solix & ice fishing
« on: March 10, 2018, 04:41:49 AM »
Hello,

does  somebody have any experience using 360 transducer connected to Solix without the "standard" si transducer.

Just wondering how to setup 360 to 6" hole in ice.  Would be quite easy with 360 only. Manual says that temperature and depth will not be available with 360, but I don't know it those are mandatory to get 360 to work in this ice fishing case.


Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • location: Western KY
  • Posts: 3428
  • Unit(s): 1197c SI Combo, Onix 8ci SI Combo
  • Software: Dependent on whim
  • Accessories: AS GRHA, AS GPS HS, LowBird LSS 1 & 2
Re: 360 with Solix & ice fishing
« Reply #1 on: March 10, 2018, 08:21:08 PM »
360 needs a 2d source for digital depth calculation  ...

Rickie

Offline Ahvena

  • Newbie
  • *
  • Joined: Feb 2018
  • location: Finland
  • Posts: 4
  • Unit(s): Solix 12 SI Mega
  • Accessories: 360 TM
Re: 360 with Solix & ice fishing
« Reply #2 on: March 11, 2018, 06:08:36 AM »
Thank you for the reply. So this will become a bit more complicated setup for ice fishing. :)

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • location: Western KY
  • Posts: 3428
  • Unit(s): 1197c SI Combo, Onix 8ci SI Combo
  • Software: Dependent on whim
  • Accessories: AS GRHA, AS GPS HS, LowBird LSS 1 & 2
Re: 360 with Solix & ice fishing
« Reply #3 on: March 11, 2018, 06:16:24 PM »
Can you Drill 2 holes  ...??

It's not necessary that 360 and the 2d source be in the same hole  ...

Rickie

Offline Ahvena

  • Newbie
  • *
  • Joined: Feb 2018
  • location: Finland
  • Posts: 4
  • Unit(s): Solix 12 SI Mega
  • Accessories: 360 TM
Re: 360 with Solix & ice fishing
« Reply #4 on: March 12, 2018, 12:04:07 AM »
Yes, that would make things easier.

And I have heard that physical exercise is also healthy. :)

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • location: Western KY
  • Posts: 3428
  • Unit(s): 1197c SI Combo, Onix 8ci SI Combo
  • Software: Dependent on whim
  • Accessories: AS GRHA, AS GPS HS, LowBird LSS 1 & 2
Re: 360 with Solix & ice fishing
« Reply #5 on: March 12, 2018, 05:50:21 PM »
Yes, that would make things easier.

And I have heard that physical exercise is also healthy. :)

I admire your humor  ... Good one  ...

Rickie

Offline Jaak

  • Newbie
  • *
  • Joined: Jan 2014
  • location: Estonia
  • Posts: 1
  • Unit(s): Helix 10 SI, TM 360
Re: 360 with Solix & ice fishing
« Reply #6 on: May 18, 2018, 06:33:01 AM »
Can you Drill 2 holes  ...??

It's not necessary that 360 and the 2d source be in the same hole  ...

Rickie

There is no need ford 2D, i used it without this. It gives only depth , in numbers on screen. You can undestand how deep it is on 360 screen, look at range rings... and you can approximately find out how deep it is.

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • location: Western KY
  • Posts: 3428
  • Unit(s): 1197c SI Combo, Onix 8ci SI Combo
  • Software: Dependent on whim
  • Accessories: AS GRHA, AS GPS HS, LowBird LSS 1 & 2
Re: 360 with Solix & ice fishing
« Reply #7 on: May 18, 2018, 01:30:43 PM »
There is no need ford 2D, i used it without this. It gives only depth , in numbers on screen. You can undestand how deep it is on 360 screen, look at range rings... and you can approximately find out how deep it is.

Good point Jaak  ...

Rickie

Offline Ahvena

  • Newbie
  • *
  • Joined: Feb 2018
  • location: Finland
  • Posts: 4
  • Unit(s): Solix 12 SI Mega
  • Accessories: 360 TM
Re: 360 with Solix & ice fishing
« Reply #8 on: May 24, 2018, 01:44:05 PM »
Good to know, Jaak! I succeeded to have both transducers in the same ice hole at the end, but the installation was a bit messy with all cables etc. Would be much simple with only 360, thanks!

Offline Rickard

  • Hero Member
  • *****
  • Joined: May 2009
  • location: Luleň Sweden
  • Posts: 501
  • Unit(s): 999, 981, M37, LowBird-1, LowBird-2
Re: 360 with Solix & ice fishing
« Reply #9 on: May 26, 2018, 07:35:49 AM »
Just wondering, the SI systems use the 2D channel to adjust ping rate in the SI channels. SI without 2D works, but at the slowest rate in the system, which means very bad performance. What about the 360 system, does it work independent of 2D info or does it need depth from 2D to ping at optimal rate?

Rickard

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • location: Western KY
  • Posts: 3428
  • Unit(s): 1197c SI Combo, Onix 8ci SI Combo
  • Software: Dependent on whim
  • Accessories: AS GRHA, AS GPS HS, LowBird LSS 1 & 2
Re: 360 with Solix & ice fishing
« Reply #10 on: May 26, 2018, 07:22:04 PM »
Just wondering, the SI systems use the 2D channel to adjust ping rate in the SI channels. SI without 2D works, but at the slowest rate in the system, which means very bad performance. What about the 360 system, does it work independent of 2D info or does it need depth from 2D to ping at optimal rate?

Rickard


HB has not confirmed Rickard  ... but the forums indicate 2d is only for displaying 2d digital depth on the 360 image  ...

I don't have 360 (yet) to see if I can detect a difference  ...

Rickie

Offline D Johnson

  • Jr. Member
  • **
  • Joined: Mar 2018
  • location: NE FL
  • Posts: 25
  • Unit(s): 2 networked Helix 10 Chirp SI GPS G2N
  • Software: 1.610
  • Accessories: B1gF1sh@HB
Re: 360 with Solix & ice fishing
« Reply #11 on: May 26, 2018, 07:33:59 PM »
I will check my new 360 next time I am on the water.  Should be able to just shut down the 2D and see what happens.  Probably won't be this coming week as the storm moving into the gulf is going to give us a lot of rain.  Don
Don


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
3225 Views
Last post May 28, 2009, 05:45:10 PM
by RGecy
10 Replies
3586 Views
Last post August 30, 2017, 06:10:38 PM
by fshndude
3 Replies
2257 Views
Last post February 08, 2018, 06:08:35 AM
by rnvinc
0 Replies
1316 Views
Last post December 29, 2017, 09:23:06 AM
by bigkahuna
Solix

Started by DennyO Solix

2 Replies
1544 Views
Last post January 25, 2018, 11:41:19 AM
by N9Phil
1 Replies
552 Views
Last post January 23, 2018, 05:47:34 PM
by rnvinc
13 Replies
2042 Views
Last post August 14, 2018, 08:31:39 AM
by TroyBoy30
6 Replies
1197 Views
Last post February 11, 2018, 04:42:33 AM
by reso


SimplePortal 2.3.3 © 2008-2010, SimplePortal