Author Topic: Mechanical Noise  (Read 9966 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike_Sea

  • Newbie
  • *
  • Joined: Dec 2013
  • Location: Latvia
  • Posts: 7
  • Unit(s): 1198cx si combo
Mechanical Noise
« on: January 07, 2014, 04:31:21 AM »
As you can see this is not usual picture of a SI. There're some noise and mechanical obstruction.

Using Kingston SD HC card 10 class

Why this is happened?



Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Mechanical Noise
« Reply #1 on: January 07, 2014, 05:54:41 PM »
Mike,

Did you play this file back on the Humminbird unit?  Do you get the same thing?

This is not at all what it shoud look like and is more than mechanical or noise issue!

Play it back on the unit and take some snapshots and post back here.

Robert
Humminbird Guru and Forum Administrator

Offline Mike_Sea

  • Newbie
  • *
  • Joined: Dec 2013
  • Location: Latvia
  • Posts: 7
  • Unit(s): 1198cx si combo
Re: Mechanical Noise
« Reply #2 on: January 08, 2014, 07:18:12 AM »
Robert,

Here's a snapshot in att.

There are no noise and picture is clear.

Also, when I'm play record my Humminbird 1198cx si Combo, and click on "FF Play" its restarts.
While paying record I click on "View" button, and its restarts as well.

But sometimes play ok..

Mike

Offline sonar2000

  • Chief
  • Global Moderator
  • *
  • Joined: May 2009
  • Location: Kerr Lake NC
  • Posts: 5970
  • It is not lost ...it has been misplaced.
  • Unit(s): (1) 1197 (1) 1198
  • Software: 6.6
  • Accessories: Tow Fish
Re: Mechanical Noise
« Reply #3 on: January 08, 2014, 07:54:45 AM »
Take a 5 minute recording and then download humviewer from this site and view the recording on a computer. Viewers use the raw data recorded to display the screens. It is probably a better playback detail than the HB playback feature in the unit. 
Also make sure the boat is moving during the recording and not sitting still..
chuck

Offline Mike_Sea

  • Newbie
  • *
  • Joined: Dec 2013
  • Location: Latvia
  • Posts: 7
  • Unit(s): 1198cx si combo
Re: Mechanical Noise
« Reply #4 on: January 08, 2014, 08:37:34 AM »
Chuck,

I make more than 20 min rec.
Is there a max time limit?

Mike

Offline LittleGazoo

  • Full Member
  • ***
  • Joined: Jan 2011
  • Location: Big Sandy, TX
  • Posts: 221
  • Unit(s): SOLIX 15 G2, SOLIX 12 G2
  • Software: 3.640
  • Accessories: Ethernet
Re: Mechanical Noise
« Reply #5 on: January 08, 2014, 10:49:39 AM »
I make more than 20 min rec.
Is there a max time limit?

Depends on the SD-card size.  Your can record and re-record until the SD-card is full.

Offline sonar2000

  • Chief
  • Global Moderator
  • *
  • Joined: May 2009
  • Location: Kerr Lake NC
  • Posts: 5970
  • It is not lost ...it has been misplaced.
  • Unit(s): (1) 1197 (1) 1198
  • Software: 6.6
  • Accessories: Tow Fish
Re: Mechanical Noise
« Reply #6 on: January 08, 2014, 01:20:28 PM »
Card size determines to a point the time you can record. However for your problem I was suggesting a 5 min record. That should give enough information to help with your problem..
chuck

Offline Mike_Sea

  • Newbie
  • *
  • Joined: Dec 2013
  • Location: Latvia
  • Posts: 7
  • Unit(s): 1198cx si combo
Re: Mechanical Noise
« Reply #7 on: January 08, 2014, 04:07:42 PM »
I've got a Kingston 16 GB 10 Class SD HC card.

Tomorrow going to a lake to test. Also done a full format.

Offline sonar2000

  • Chief
  • Global Moderator
  • *
  • Joined: May 2009
  • Location: Kerr Lake NC
  • Posts: 5970
  • It is not lost ...it has been misplaced.
  • Unit(s): (1) 1197 (1) 1198
  • Software: 6.6
  • Accessories: Tow Fish
Re: Mechanical Noise
« Reply #8 on: January 09, 2014, 08:10:32 AM »
Mike, download humviwer and look at your recording on the computer. let us know what you see..
Here is the link to get humviewer.. http://humviewer.cm-johansen.dk/
chuck
« Last Edit: January 09, 2014, 08:12:49 AM by sonar2000 »

Offline Mike_Sea

  • Newbie
  • *
  • Joined: Dec 2013
  • Location: Latvia
  • Posts: 7
  • Unit(s): 1198cx si combo
Re: Mechanical Noise
« Reply #9 on: January 10, 2014, 10:23:44 AM »
Today I've done a record for 2h and it pays well in HumViewer

Also I've downloaded and using:
HumminbirdPc
HumFinder
HumMapper 2.1
SI View
Son2xtf
DeepView

Thank all of you for advices!

Mike


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
9022 Views
Last post August 05, 2011, 04:25:21 AM
by goodwinexplorer
4 Replies
7299 Views
Last post August 08, 2012, 01:41:44 PM
by Rüdiger
1 Replies
7586 Views
Last post June 28, 2013, 09:57:52 AM
by ITGEEK
5 Replies
8309 Views
Last post July 10, 2013, 10:16:36 AM
by ITGEEK
15 Replies
14666 Views
Last post September 10, 2013, 11:32:25 AM
by Humminbird_Greg
7 Replies
8074 Views
Last post May 29, 2014, 09:50:37 AM
by gofission
0 Replies
5234 Views
Last post March 16, 2016, 09:23:27 PM
by tambrose76
3 Replies
2179 Views
Last post May 09, 2020, 10:17:30 PM
by rnvinc


SimplePortal 2.3.3 © 2008-2010, SimplePortal