Author Topic: Member Map - Don't forget to place your pin  (Read 32153 times)

0 Members and 1 Guest are viewing this topic.

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Member Map - Don't forget to place your pin
« on: June 13, 2009, 12:51:10 AM »
If you haven't looked at the Member Map, take a minute and place your pin.  We have over 1900 members now and only a hand-full have placed their pins so far.  Go to the member map and click on the "Click here to Place your pin" at the bottom of the page. 
Or you can also follow this link to place your pin.

It's interesting to see where we have members around the world!

Thanks,

Robert
« Last Edit: July 16, 2010, 02:05:58 AM by RGecy »
Humminbird Guru and Forum Administrator


Offline trixter

  • Newbie
  • *
  • Joined: Sep 2009
  • Location: Central Point, OR
  • Posts: 2
  • Unit(s): 595c
Re: Member Map - Don't forget to place your pin
« Reply #1 on: February 04, 2010, 09:37:55 AM »
tried to get to member map but cannot link up.  help!

Offline sonar2000

  • Chief
  • Global Moderator
  • *
  • Joined: May 2009
  • Location: Kerr Lake NC
  • Posts: 5970
  • It is not lost ...it has been misplaced.
  • Unit(s): (1) 1197 (1) 1198
  • Software: 6.6
  • Accessories: Tow Fish
Re: Member Map - Don't forget to place your pin
« Reply #2 on: February 04, 2010, 11:17:43 AM »
If you want to keep your exact location secret then pick something close like a lake or river.  At least we will be able to see where our members are  geographically.  And who knows...you might find a new fishing friend.  Sometimes heving a close neighbor will help with setting or operational aspects of your unit.  Chuck
« Last Edit: June 03, 2010, 07:24:30 PM by sonar2000 »

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Member Map - Don't forget to place your pin
« Reply #3 on: February 04, 2010, 12:48:13 PM »
The member map is down temporarily.  We are making some upgrades.

Thanks for your patience.

Robert
Forum Administrator
Humminbird Guru and Forum Administrator

Offline Rotorfixer

  • Newbie
  • *
  • Joined: Mar 2009
  • Location: Slave Lake, Alberta, Canada
  • Posts: 6
Re: Member Map - Don't forget to place your pin
« Reply #4 on: June 03, 2010, 05:47:14 PM »
If you want to keep your exact location secret then pick something close like a lake or river.  At least we will be able to see where our members are  geographically.  And who knows...you might find a new fishing friend.  Sometimes heving a close neighbor will help with setting or operstional aspects of your unit.  Chuck

Looks like I'm SOL !!
2008 ploarkraft kodiak 178
Slave Lake, AB, CANADA
798c Si

Offline Louis

  • Newbie
  • *
  • Joined: Mar 2009
  • Location: Regina, SK Canada
  • Posts: 14
  • Unit(s): 1197c SI
  • Software: 4.750
  • Accessories: Weathersense
Re: Member Map - Don't forget to place your pin
« Reply #5 on: June 03, 2010, 07:14:08 PM »
Me too, not many of us in Canada.

Offline sfw1960

  • Bringer Of The 'Bird
  • Sr. Member
  • ****
  • Joined: Jul 2010
  • Location: White Cloud , MI
  • Posts: 422
    • http://www.michigan-sportsman.com/forum/member.php?u=3330
  • Unit(s): H10MSI G2N-H10MDI G2N-H12SI-H12MSI G2N
  • Software: v1.840 x 3, v1.830
  • Accessories: AS GPS HS x2, I-Pilot Link, RC-1, RC-2
Re: Member Map - Don't forget to place your pin
« Reply #6 on: July 05, 2010, 12:38:23 AM »
 ;D
Alright then!!!


 >:D

Offline TeddyDiver

  • Newbie
  • *
  • Joined: Jan 2010
  • Posts: 9
  • Unit(s): 798c
Re: Member Map - Don't forget to place your pin
« Reply #7 on: July 05, 2010, 09:28:59 AM »
And I'm the most northern member..
Teddy

Offline MT-ED

  • Jr. Member
  • **
  • Joined: Feb 2014
  • Location: Montana
  • Posts: 58
  • Unit(s): 798ci SI, 1199ci HD SI, 360 BM
  • Software: 6.3
  • Accessories: AS GPS HS, Autochart Pro
Re: Member Map - Don't forget to place your pin
« Reply #8 on: February 09, 2014, 01:18:54 PM »
I tried to.....guess I'm not bright enough to figure it out ::)

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Member Map - Don't forget to place your pin
« Reply #9 on: February 09, 2014, 08:15:37 PM »
Did you click the 3rd link in the first post?  It will take you to your profile and you will be able to zoom in and out on the map.  Find the location you want to place your pin and click on it.  Then go down and click the save button at bottom of your profile.

Or you can also follow this link to place your pin.


Good Luck,

Robert
« Last Edit: February 09, 2014, 08:31:09 PM by RGecy »
Humminbird Guru and Forum Administrator

Offline MT-ED

  • Jr. Member
  • **
  • Joined: Feb 2014
  • Location: Montana
  • Posts: 58
  • Unit(s): 798ci SI, 1199ci HD SI, 360 BM
  • Software: 6.3
  • Accessories: AS GPS HS, Autochart Pro
Re: Member Map - Don't forget to place your pin
« Reply #10 on: February 09, 2014, 08:34:43 PM »
Did you click the 3rd link in the first post?  It will take you to your profile and you will be able to zoom in and out on the map.  Find the location you want to place your pin and click on it.  Then go down and click the save button at bottom of your profile.

Or you can also follow this link to place your pin.


Good Luck,

Robert


Hi Robert, yes, that is exactly what I did.....in fact tried 3 times, but when I went back to check if I got "pinned", it wasn't there???

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Member Map - Don't forget to place your pin
« Reply #11 on: February 11, 2014, 01:31:37 AM »
OK, there WAS a problem with the Member Map.  Apparently the Google API was out of date and you could not place your pin on the map.  It wasn't saving it.  So give it a try now.

I would ask that anyone who has or hasn't done this, follow this link and make sure your pin placement is showing up in your profile.  If not, zoom to your location and click on the spot you want to put your pin, then go to the bottom of the page and click "Change Profile" button.

http://forums.sideimagingsoft.com/index.php?action=profile;area=forumprofile#googlemap

Let me know if you have any problems.

Robert

Humminbird Guru and Forum Administrator

Offline MT-ED

  • Jr. Member
  • **
  • Joined: Feb 2014
  • Location: Montana
  • Posts: 58
  • Unit(s): 798ci SI, 1199ci HD SI, 360 BM
  • Software: 6.3
  • Accessories: AS GPS HS, Autochart Pro
Re: Member Map - Don't forget to place your pin
« Reply #12 on: February 11, 2014, 09:14:15 PM »
Hi RG,

I triied to  pin the map again. In my profile, I was able to do so, however, on the heading "member map", it doesn't show up. Just an FYI.

mt-ed

ed

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Member Map - Don't forget to place your pin
« Reply #13 on: February 11, 2014, 10:02:33 PM »
MT-ED,

It showed your location for me on the Member Map! 

And thank you very much for signing up as Charter Member!  Your contribution is greatly appreciated!

Humminbird Guru and Forum Administrator

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Member Map - Don't forget to place your pin
« Reply #14 on: February 12, 2014, 08:07:59 AM »
Robert,
I tried to edit mine and now it does not show up.  I got no map image to move my pin when on my Profile page.

Greg Walters at Humminbird
gwalters@johnsonoutdoors.com

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Member Map - Don't forget to place your pin
« Reply #15 on: February 12, 2014, 07:32:25 PM »
Might be browser related.  I looked at yours Greg and it took a second to show, but it did come up. 

Robert
Humminbird Guru and Forum Administrator

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Member Map - Don't forget to place your pin
« Reply #16 on: February 13, 2014, 02:45:58 PM »
Could be Robert.  I pulled it up while viewing the rest of the site yet in never showed.  I’ll try and remember to try it at home using Mozilla.

EDIT: Okay I got it now.  Using IE here at work and had to change the Compatibility View for it to show up.  I moved my marker to show what part of the building I mainly work in.
 :)
« Last Edit: February 13, 2014, 02:50:49 PM by Humminbird_Greg »
Greg Walters at Humminbird
gwalters@johnsonoutdoors.com

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Member Map - Don't forget to place your pin
« Reply #17 on: February 13, 2014, 06:29:07 PM »
Wow, the resolution on Google Maps is just phenominal!  I was able to zoom in and saw you sitting at your desk! 
Humminbird Guru and Forum Administrator

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Member Map - Don't forget to place your pin
« Reply #18 on: February 14, 2014, 12:37:52 PM »
The amazing part Robert is that they caught me on a day when I was actually working!  ;D
Greg Walters at Humminbird
gwalters@johnsonoutdoors.com

Offline rpmjr

  • Newbie
  • *
  • Joined: Jul 2014
  • Location: washington
  • Posts: 11
  • Unit(s): 998c
  • Software: 7.090
Re: Member Map - Don't forget to place your pin
« Reply #19 on: July 09, 2014, 12:31:36 PM »
come on peeps, add your pin, want to see if there are some potential new fishing buddies in San Juan Islands of Washington state near Anacortes!!!!!!

Offline October1

  • Jr. Member
  • **
  • Joined: Feb 2015
  • Location: Michigan
  • Posts: 89
  • Unit(s): Getting ready to buy
  • Software: N/A
  • Accessories: None
Re: Member Map - Don't forget to place your pin
« Reply #20 on: April 23, 2015, 04:23:32 AM »
Maybe I missed the answer, but why doesn't my pin show up?

Offline Seabee

  • Newbie
  • *
  • Joined: Feb 2015
  • Location: California
  • Posts: 6
  • Unit(s): 798csi,798csi,597
  • Software: 4.70
  • Accessories: external gps, trolling motor transducer
Placed my pin
« Reply #21 on: June 19, 2018, 07:12:32 PM »
Located central valley California. May be relocating to Texas  soon if I do will move my pin. Until then any member in the area greetings to you.


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
10041 Views
Last post June 21, 2011, 06:43:58 PM
by terry0540
22 Replies
23035 Views
Last post August 23, 2011, 11:02:56 PM
by MonteSS
0 Replies
9799 Views
Last post May 04, 2012, 03:42:39 PM
by jnc5908404
2 Replies
11449 Views
Last post June 03, 2013, 11:52:33 AM
by Humminbird_Greg
5 Replies
28465 Views
Last post March 10, 2014, 12:25:48 PM
by Humminbird_Greg
3 Replies
11143 Views
Last post December 04, 2013, 09:34:43 PM
by Bob B
1 Replies
10939 Views
Last post February 17, 2014, 07:46:40 PM
by rnvinc
46 Replies
34103 Views
Last post September 22, 2014, 11:30:17 PM
by newkid4si


anything
SimplePortal 2.3.3 © 2008-2010, SimplePortal