Humminbird Side Imaging Forums

Side Imaging Forums => 798c SI => Topic started by: Fay on July 02, 2016, 05:03:02 PM

Title: 798 Triplog Questioni
Post by: Fay on July 02, 2016, 05:03:02 PM

Is the “triplog” data only displayed on the units screen or can it be
found elsewhere ?  I see the "Triplog Reset" but I want to see the "triplog".
Thanks in advance -

Title: Re: 798 Triplog Questioni
Post by: rnvinc on July 04, 2016, 10:22:30 AM

The Triplog must be assigned to one of the Readout boxes under the Setup tab ...

Then use the "Triplog Reset" selection under the Setup tab to zero the Triplog data in the Readout box ...

Rickie