Humminbird Side Imaging Forums

Side Imaging Forums => 898c SI => Topic started by: Spidey on April 13, 2015, 05:33:30 PM

Title: Depth Change
Post by: Spidey on April 13, 2015, 05:33:30 PM

I have an 898 and the depth will not change.  It is locked on 1.5 which is giving me a fit. I have went through the upgrades, restored defaults and still no change.  My transducer appears to be working fine because I still can get DI and SI and as the lake bottom change I'm able to see the changes and the depth. But the readout is always 1.5.

Title: Re: Depth Change
Post by: rnvinc on April 13, 2015, 10:49:56 PM

Is this setup using the AS SIDB Y cable and a shoot thru hull xducer ...?

If it is ... Try disconnecting the AS SIDB Y cable and plug the HDSI directly into the unit ...

If there is no additional xducer ... It sounds like the 2d piezo is not working ...

Rickie