Humminbird Side Imaging Forums

Side Imaging Forums => Solix => Topic started by: bassmasterG13 on December 14, 2018, 06:04:25 PM

Title: Solix setup for my new skeeter
Post by: bassmasterG13 on December 14, 2018, 06:04:25 PM
I recently purchased a 2014 skeeter 190tzx. I will be adding a ultrex and am planning on adding a unit at the bow as well as console. The boat has the stock 789 unit in console. Will I be able to hook the thru Hull transducer currently  mounted in the boat to any new unit for high speed readings ? Also Is there a major difference in the solix 12 chirp mega sI gpsi (model 410400-1) and the brand new gen2 si solix? I am looking to mount the solix 12 at the console and maybe a helix at the bow. Any thoughts or recommendations would be greatly appreciated. Thanks !
Title: Re: Solix setup for my new skeeter
Post by: rnvinc on December 15, 2018, 01:28:54 AM
I recently purchased a 2014 skeeter 190tzx. I will be adding a ultrex and am planning on adding a unit at the bow as well as console. The boat has the stock 789 unit in console. Will I be able to hook the thru Hull transducer currently  mounted in the boat to any new unit for high speed readings ? Also Is there a major difference in the solix 12 chirp mega sI gpsi (model 410400-1) and the brand new gen2 si solix? I am looking to mount the solix 12 at the console and maybe a helix at the bow. Any thoughts or recommendations would be greatly appreciated. Thanks !

Please verify which unit model you have - there was no 789  ...

Also verify which xducer is epoxied in the bilge - there should be a model number printed on the cable about 1ft from the connector end  ...
-----

I haven't heard if dealers have even received the SOLIX G2 units yet  ...

Rickie
SimplePortal 2.3.3 © 2008-2010, SimplePortal