Author Topic: Help, please  (Read 2131 times)

0 Members and 1 Guest are viewing this topic.

Offline seamonkey

  • Jr. Member
  • **
  • Joined: Mar 2013
  • Location: Spring Grove,PA
  • Posts: 20
  • Unit(s): 898si
Help, please
« on: July 03, 2013, 05:49:06 PM »
Navionics sent me an email today. I was having problems getting good contour lines with my navionics card. The best I could get is 10' contour.  Navionics said that I should get better than that.  So she told me I need to update my Hummingbird software and then  Insert my card again, press the menu button twice.  Select Charts tab, then go to CHART SELECT then select FISH N' CHIP. in doing this she was able to see way more contours.  What the heck is she talking about?  I have been through this Charts menu 100 times and I can't find FISH'N CHIP. I am running firmware 6.640 did I miss something? 


Offline seamonkey

  • Jr. Member
  • **
  • Joined: Mar 2013
  • Location: Spring Grove,PA
  • Posts: 20
  • Unit(s): 898si
Re: Help, please
« Reply #1 on: July 04, 2013, 12:36:15 PM »
 You need to remove your SD card from the slot and leave navionics card in the slot.  Start the unit then select chart under the main menu.  scroll down to chart select and  scroll left or right until you see fishn'chip then exit.  put your SD card back in and your good to go.

Offline seamonkey

  • Jr. Member
  • **
  • Joined: Mar 2013
  • Location: Spring Grove,PA
  • Posts: 20
  • Unit(s): 898si
Re: Help, please
« Reply #2 on: July 04, 2013, 12:37:54 PM »
 Hey it worked ! Thanks for your help.  Now I have contour lines every foot and amazing detail.


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 


SimplePortal 2.3.3 © 2008-2010, SimplePortal