Humminbird Side Imaging Forums

Side Imaging Forums => 997c SI, 998c SI & 999ci HD SI => Topic started by: TRX on January 25, 2016, 12:56:11 AM

Title: Ethernet 998c to 999ci hd combo
Post by: TRX on January 25, 2016, 12:56:11 AM
What Can I share. is it possible to have the 998 a 2d and the 999 on ds/ss?
Title: Re: Ethernet 998c to 999ci hd combo
Post by: rnvinc on January 25, 2016, 02:29:31 PM
Absolutely ... With 2 SI units (and current software) both can share all Sonar technologies ... Accessories ...and waypoints ...

Mapping cannot be shared in any HB units except ONIX to ONIX ...

Rickie
Title: Re: Ethernet 998c to 999ci hd combo
Post by: jabsy on January 25, 2016, 05:40:45 PM
You can share the SI to non-SI models as well. I have a 898SI and 859DI, and can see the SI on the DI unit.



Title: Re: Ethernet 998c to 999ci hd combo
Post by: Bob B on January 25, 2016, 07:20:56 PM
You can share the SI to non-SI models as well. I have a 898SI and 859DI, and can see the SI on the DI unit.

Yes
Title: Re: Ethernet 998c to 999ci hd combo
Post by: TRX on January 25, 2016, 08:38:46 PM
Thats good to know. Thank you
Title: Re: Ethernet 998c to 999ci hd combo
Post by: TRX on January 28, 2016, 02:12:54 AM
I have my new 999 networked to my 998c. I have the pwer and the tranducer connecetd to the 999. I power on the 999 andthe 998c doesnt come on unless it has direct power. All units are up to date. Shouldn't the 998 turn on aslong as its hooked to the 999
 
Title: Re: Ethernet 998c to 999ci hd combo
Post by: rnvinc on January 28, 2016, 10:04:53 PM
I have my new 999 networked to my 998c. I have the pwer and the tranducer connecetd to the 999. I power on the 999 andthe 998c doesnt come on unless it has direct power. All units are up to date. Shouldn't the 998 turn on aslong as its hooked to the 999
 

Power is not shared thru Ethernet ...

Each unit will have to be wired to 12v power ...and each unit will have to be powered on with its own power button ...

Rickie
SimplePortal 2.3.3 © 2008-2010, SimplePortal