Humminbird Side Imaging Forums

Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: Chad711 on September 05, 2011, 07:39:51 PM

Title: Trails disappear on 1197 after powering off??
Post by: Chad711 on September 05, 2011, 07:39:51 PM

I upgraded my buddies 1197 to most recent software. Now the trail that you see that you run on the lake disappear after you power off each time. I think these are what you call trails??

Only way to get them to save is to save current track and then of course it's there until you delete it.

How do I fix this?

Title: Re: Trails disappear on 1197 after powering off??
Post by: Bob B on September 05, 2011, 08:05:51 PM

Is the unit being powered off via it's power button or by killing it's power?

Title: Re: Trails disappear on 1197 after powering off??
Post by: Chad711 on September 05, 2011, 08:33:21 PM

Power button

Title: Re: Trails disappear on 1197 after powering off??
Post by: RGecy on September 05, 2011, 09:30:21 PM

Do you have a battery switch and kill the power to it or disconnect it after you power it off?  Just shooting from the hip here, but I think the temporary memory is good only while it has power.  Once you disconnect it, if you have not saved the tracks, it will clear them.

Robert 

Title: Re: Trails disappear on 1197 after powering off??
Post by: NickO on September 06, 2011, 10:21:46 AM

Quote from: RGecy on September 05, 2011, 09:30:21 PM

Once you disconnect it, if you have not saved the tracks, it will clear them.

Robert

Robert is Dead on.

X2

Title: Re: Trails disappear on 1197 after powering off??
Post by: Chad711 on September 06, 2011, 02:48:01 PM

Quote from: nicko on September 06, 2011, 10:21:46 AM

Robert is Dead on.

X2

I went out to my 997 right now and check the tracks I ran on Grapevine and they are on there still. I'm not talking about saving tracks, I'm talking about Current tracks. I believe the unit will auto save up to so many of these and then start to overwrite once you meet the max allowed. Those stay on there unless you clear them youself. Well for some reason on my buddies 1197 it's clearing them after the unit is powered off.

To be clear, my 997 has been disconnected from power the whole time and I just now checked it and the tracks are there. So disconnecting it from power completely does not clear the tracks.

Title: Re: Trails disappear on 1197 after powering off??
Post by: George on September 06, 2011, 03:22:49 PM

I have an 1197 and have to clear the tracks manually. 

When done fishing I shut my unit down via the on/off button, disconnect the plug from the unit and put the unit in my truck for transporting (it never stays on the boat when on the trailer). 

The tracks are always there until I clear them manually, which is done the next time I go fishing.

George

Title: Re: Trails disappear on 1197 after powering off??
Post by: RGecy on September 07, 2011, 02:23:47 AM

Well, glad you guys could confirm that.  I wasnt shure and didn't have a unit handy to test it on.

Back to square one!

Robert

Title: Re: Trails disappear on 1197 after powering off??
Post by: stillbear on September 07, 2011, 07:56:29 AM

Chad is it posible under saved tracks your buddies is defaulting to to( hidden instead of visable)     Gary

Title: Re: Trails disappear on 1197 after powering off??
Post by: Chad711 on September 07, 2011, 08:23:17 AM

I'll check that when I get home today. Thanks